If The door starts to close, then reverses and the opener light blinks.
Then Photo-eye alignment.
The sensors near the floor are out of line or dirty; a clean and re-aim usually restores normal closing.

A creased bottom panel is a common sight in Orchard Heights, and it rarely means a whole new door. We check the struts, hinges and track alignment, replace the damaged section when a match is available, and reinforce the panel so the door lifts straight and looks whole again from the street.
Same fees day or night · Orchard Heights
Pick the closest, or call (289) 805-3301
Repair & MaintenanceInspection, adjustment, sealing, and section-level repairs.
Springs & HardwareCounterbalance, track, roller, cable, and hinge work.
Openers & AccessOperators, safety sensors, controls, and access systems.
Installation & UpgradesResidential and commercial replacement, upgrades, sectional-door, and rolling-door work.For customers in Orchard Heights the sequence is always the same. Assess the door in person. Explain what was found and why. Price the options on site. Do the agreed work with the door secured and the right tools. Test every part of the travel. Show you what changed. Then clean up and go.
Nearby Mississauga, Applewood Hills, Markland Woods and Applewood Heights
Remotes, keypads and phones that agree.
24 years in business · Let us take a look: (289) 805-3301
Orchard Heights
Households in Orchard Heights mostly need three things from us over the life of a door: a tune-up now and then, a spring or cable when one lets go, and a new opener or door when the old one is finished. Every one of those, plus the smaller jobs between, is covered below.

Garage Door Roller Replacement, Garage Door Safety Inspection, Garage Door Track Repair or Replacement…
Tap a situation. The answer opens here.
If The door starts to close, then reverses and the opener light blinks.
Then Photo-eye alignment.
The sensors near the floor are out of line or dirty; a clean and re-aim usually restores normal closing.
If The door touches the floor and pops back open.
Then Close-limit adjustment.
The opener thinks it hit something; setting the travel limit correctly stops the bounce.
If The door closes but leaves a gap along the bottom.
Then Bottom seal and limit setting.
A compressed seal or a short travel limit leaves daylight; both are simple to correct. Garage Door Bottom Seal Replacement
PeelOntario
Every square is one home in a hundred.
With the opener disconnected, the door is lifted by hand. If it moves with light effort and stays put at waist height, the springs are carrying its weight as designed. If it drifts up, sinks or feels heavy, the springs are out of step with the door and the opener has been doing the lifting. That strain shortens the opener's life and can defeat its reversal settings, which is why balance is checked first.
Yes, and it is one of the main reasons to replace them before they fail. A wheel worn oval, a bent stem, or a short stem sitting loose in a double hinge lets a section drift until the wheel climbs onto the track lip; from there a bump or a gust can carry it out entirely. A door hanging crooked is a far larger repair than a set of rollers. Fresh, correctly sized rollers seated in a squared track are what keep the door where it belongs.
It is galvanized steel folded into a channel that the roller wheels ride in. Residential doors almost always use two-inch track, with three-inch reserved for heavier or wider doors. The curved piece comes in a radius, commonly 12 or 15 inches, that sets how much headroom the door uses. Replacement pieces are ordered to the same profile, gauge and radius as the rest of the set.
Leave it. With one cable slack the door is being carried on one side only, so it is unbalanced and may bind or drop unevenly when moved. The technician arrives with clamps and a method for taking the door's weight before anything is moved, and that is the moment to lift it. Until then a stationary door is exactly what you want.
On-site assessment
Get a technician to your door in Orchard Heights.
(289) 805-3301, open 24/7.
On-site assessment preferred · (289) 805-3301, open 24/7